Pipeless swimming pool – The low down on pipe free filtration
We have had a few customers over the past weeks ask about pipe free or pipeless filtration systems for their Compass Pool. We see several companies starting to offer this solution, we put in plain English the pros and cons of these systems.
Firstly, lets get some myths out the way. There is no such thing as a pipe free filtration system. Just one that’s all contained in one underground box. Within this box is contained a pump, a cartridge filter or bag filter and sometimes an electric heater joined with pipes. If you would like another form of heater other than electric (that we never recommend as a primary heat source due to the running costs) you will need to run the pipe work to the heat pump or boiler. This is usually done in a trench, just as in a conventional filtration system, as you don’t want it stuck next to your pool making noise and generating cold air! We always recommend that the plant room is located away from the pool as you want to avoid the noise from the pumps near your swimming experience. Furthermore, you should place them above ground to prevent the risk of the units flooding with high groundwater – an issue we have all experienced with the recent wet winters.
Probably the most important factor when designing a swimming pool filtration system is the electrical safety in and around the pool.
In essence, you cannot put any mains voltage equipment within 2m of the pool itself (for the same reason you cannot bring a mains voltage appliances into the bath). When the pool equipment is attached to the pool itself in an underground box. you are running a 230v pump and control panel below